Kisan Electronics 30W-D - Manual (Page 27)

Page - 26
BMW K-1200LT
For the Rack mounted LED
Light-bar, 25LED-LT is an in-line
plug-in unit. It requires a
connection to a switched power
source. 25LED-LT also makes
the Light bar to come on as a
Running Light with
programmable intensities. This
feature improves your rearward
visibility – especially since the
Light bar is mounted so high off
the ground. When the brakes a
applied the Light bar will exec
a 4-sec exponential decay flas
pattern at full intensity
re
ute
h
he integrated taillight assembly has (2) dual contact bulbs for brakes.
e
T
Loosen both 10mm retaining bolts (one inside each saddle) to remove th
taillight assembly. You can replace brake bulbs with (2) 20W-DZ.
.
BMW tailBlazer Application
K1200LT (2) 20W-DZ OR 25LED-D
ALL CAN-bus models 20W-S 2PAK or 20W-DZ
Earlier models 20W-S, 20W-D or 100HD-M
20W-DZ 2PAK
25LED- LT
If combination of tailBlazer products are used together, the flash
sequence will be in synch – except for the last 2 or 3 flashes.