Kisan Electronics 30W-D - Manual (Page 15)

Page - 14
100HD-MZ
tailBlazer
100HD-MZ has (3) screw-in terminals:
„ Input Terminal: for Brake Input
„ Output Terminal: for Output to the bulbs
„ Ground Terminal: for the Ground
„ Modulates the LED tail lights for a 4-sec Deceleration Warning
Trigger voltage: 10.9 volts
DO NOT EXCEED THE RATED WATTAGE.
Warranty coverage will be denied, if unit is damaged from overload.
100HD-MZ a special circuit to allow monitoring voltage pass-thru.
This suspends bulb filament detection during brake flash. It is
compatible with BMW, Piaggio & Ducati models that have LED tail
lights with current monitoring. MAX load is 27W.
(1) WIRE SPLICE-IN