KD Scientific Gemini 88 - Manual (Page 4)

2
KDS Gemini 88
Specifications
Type Microprocessor dual drive, single syringe, infuse/withdraw
Accuracy ±0.35%
Reproducibility ±0.1%
Syringe:
Type Plastic, glass or stainless steel
Size Minimum 0.5 µl
Size Maximum 140 ml
Flow Rate:
Minimum 0.0004 µl/hr
Maximum 106.6 ml/min
Non Volatile Memory Storage of all settings
RS-232 RJ11-4 conductor
TTL 9-pin connector
Average Linear Force 57 lbs
Drive Motor 2 motors, each 0.9° step angle motor
Motor Drive Control Microprocessor controlled from 1/2 to 1/4
microstepping
Motor Steps per 1,600 steps at 1/2 stepping or 3,200 steps at
Rev. of Leadscrew 1/4 stepping
Step Resolution 0.33 µm/step
Step Rate:
Minimum 27.3 sec/step
Maximum 416.7 µsec/step
Pusher Travel Rate:
Minimum 0.726699 µm/min
Maximum 95.25 mm/min
Power 45 W, 1.0 A fuse
Voltage Range 95 to 130 VAC, 60 Hz; 220 to 260 VAC, 50 Hz,
selectable
Dimensions, H x W x D 15.2 x 31.1 x 28.6 cm (6 x 12.5 x 11.25 in)
Weight 6.8 kg (15 lb)
Timing Belt Drive 2:1
Lead Screw Pitch 24 threads/inch
Display 5 digits plus 14 indicator LEDS