JUMO 602031 Panel-Mounted Thermostat, heatTHERM Data Sheet - Manual (Page 3)

2013-11-12/00415410
Data Sheet 602031 Page 3/10
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
Technical data
Case
Electrical data
Case Sheet steel, galvanized
Protection type IP 00 according to EN 60529
Switching socket Polyester resin molding compound, black
Max. permissible ambient
temperature For transport and storage: -40 to +80 °C
In use: Max. +80 °C
Rated position (NL) Any
Weight Approx. 0.12 kg
Capillary 2,000 mm including 460 mm protective tubing as standard, min. bending radius of the capillary 5 mm
Material no. Cu-DHP
Electrical connection Snap-action switch with single-pole changeover contact
Switching capacity TR / TW STW STB
On the N/C contact (contact deck 1-2):
AC 400 V +10 %, 16 A, AC 230 V +10 %, 16 (2.5) A, cos
ϕ = 1 (0.6), DC 230 V+10 %, 0.25 A
Switching capacity On the N/O contact (contact deck 1-4):
AC 400 V +10 %, 6.3 A,
AC 230 V +10 %, 6.3 (2.5) A, cos
ϕ = 1 (0.6),
DC 230 V +10 %, 0.25 A
On the signal contact (contact deck 1-4):
AC 400 V +10 %, 2 A,
AC 230 V +10 %, 2 (04) A, cos
ϕ = 1 (0.6),
DC 230 V +10 %, 0.25 A
Snap-action switch with gold plating - extra code 702: AC / DC 24 V, 0.1 A)
Electrical connection A 6.3-0.8 according to DIN 46244
Switching reliability To ensure the greatest possible switching reliability, we recommend a minimum load of:
AC / DC = 24 V, 100 mA for silver contacts
AC / DC = 10 V, 5 mA for gold-plated contacts (TZ 702)
Switching function Rated value
Switching differential in %
of the control range span TR / TW 2.5 % Standard
TR / TW 7 % Upon request
STW 7 % Standard
Ambient temperature
influence When the ambient temperature on the switching head and the capillary deviates from the calibration ambient
temperature of +22 °C, a switching point offset of approx. -0.1 K/K occurs.
Switching point accuracy Switching differential Scale beginning Upper third
TR / TW 2.5 % Standard ± 6 % ± 3 %
7 % Upon request ± 8 % ± 4 %
STW / STB 7 % Control range In the "first half“ In the "second half“
+70 to 130 °C +0/-12 K +0/-5 K
+95 to 120 °C +0/-5 K +0/-5 K
+20 to 150 °C +0/-15 K +0/-10 K
+50 to 300 °C +0/-30 K +0/-15 K