JULABO SE-Z Heating Circulators - Manual (Page 38)

Menu functions
38
9.4. MENU CONFIG - Configuration of unit
Menu level 1


A RESET can be effected only in the >OFF< mode.
Switch off circulator by pressing the key and call up the menu
CONFIGURATION.
Level 2 Parameter level 
Press the key if a parameter is to be
retained. Correction function for parameters and
values (prior to OK).

or
•
Switch on and off remote control by pressing
and

Control display in the topline
for Remote

For remote control refer to 71

Connect RS232 with PC.

or
or
•
Switch over setpoint setting by pressing
and

OFF –Setpoint setting with the navigation keys
or
Setpoint setting via the analog socket „ext. Pt100
or
analog socket >REG+EPROG<

or
•
Switch on and off autostart by pressing
and
AUTOSTART on = on
AUTOSTART off = off
See WARNING page 40

or
•
Switch on and off OFFMODE by pressing
and
PUMP ON continuous operation of circulating pump
PUMP OFF circulating pump is linked to Start/Stop

or
or
•
Switch over the input variable by pressing
and

Programming of variables for the parameters >
SERIAL < or > EPROG < is only accepted, if the
unit is in Start mode