JULABO FCW1600_1600S Recirculating coolers - Manual (Page 36)

Menu functions
36
10.3. Adjustable parameters
ACTUAL SET
Set the parameters for the following menu items in the
configuration level:
OP - Operating mode
0
= Keypad control
1 = Remote control via RS 232
ACTUAL SET HAnd - Handshake of the serial interface
0 = XOn/XOff, software handshake
1 = RTS/CTS, hardware handshake *
ACTUAL SET PAr - Parity bits of the serial interface
0
= no
1 = odd
2 = even *
ACTUAL SET bAud - Baud rate of the serial interface
1200
Bauds
2400 Bauds
4800 Bauds*
9600 Bauds
ACTUAL SET E_Sb - External stand-by for emergency switch-off
0 = stand-by input is ignored *
1 = stand-by input is active
(Stand-by input - see page 30)
(* factory setting)