JULABO FCW1600_1600S Recirculating coolers - Manual (Page 13)

Recirculating coolers
13
 Make sure you read and understand all instructions and safety
precautions listed in this manual before installing or operating your unit.
 Never operate the unit without bath fluid in the bath.
 Do not drain the bath fluid while it is hot or cold!
Check the temperature of the bath fluid prior to draining (by switching the
unit on for a short moment for example).
 Use suitable connecting tubing.
 Avoid sharp bends in the tubing, and maintain a sufficient distance from
surrounding walls.
 Make sure that the tubing is securely attached.
 Regularly check the tubing for material defects (e.g., for cracks).
 Never operate damaged or leaking equipment.
 Always turn off the unit and disconnect the mains cable from the power
source before performing any service or maintenance procedures, or
before moving the unit.
 Always turn off the unit and disconnect the mains cable from the power
source before cleaning the unit.
 Always empty the bath before moving the unit.
 Transport the unit with care.
 Sudden jolts or drops may cause damage in the interior of the unit.
 Observe all warning labels.
 Never remove warning labels.
 Never operate equipment with damaged mains power cables.
 Repairs are to be carried out only by qualified service personnel.