JULABO FPW50-ME Refrigerated and Heating Circulators User Manual
Page 45

ME
45
9.6.
MENU SERIAL - BAUDRATE, HANDSHAKE, PARITY
Menu level 1
For communication between circulator and a PC or a superordinated process
control system the interface parameters of both units must be identical.
For remote control refer to page 59
Factory settings:
4800
Baud
even
hardware
handshake
Level 2
Parameter level
Press the
key if a parameter is to be
retained.
The parameter flashes, switch by pressing
and
The parameter flashes, switch by pressing
and
even: Data bits = 7; Stop bits = 1
odd: Data bits = 7; Stop bits = 1
no:
Data bits = 8; Stop bits = 1
The parameter flashes, switch by pressing
and
Xon/Xoff-protocol
(Software
handshake)
Protocol RTS/CTS
(Hardware handshake)
- FP50-ME Refrigerated and Heating Circulators FP40-ME Refrigerated and Heating Circulators F34-ME Refrigerated and Heating Circulators F33-ME Refrigerated and Heating Circulators F32-ME Refrigerated and Heating Circulators F26-ME Refrigerated and Heating Circulators F25-ME Refrigerated and Heating Circulators