Brother Internet Fax - Manual (Page 40)

CONFIGURING INTERNET PRINTING FOR WINDOWS ® 3 - 6
NC9100h_FM6.0
7 You will then see a message about Partial E-mail Print. Partial
E-mail Print is the ability of the Brother Internet Print software to
break down E-mail Print jobs into smaller sections to prevent a
mail file size limitation problem for the mail server.
8 Press OK to continue.
9 You will then be asked to enter the port settings for the remote
Print/Fax server:
Enter any unique legal Internet E-mail address for the remote
Print/Fax server (for example [email protected]). Note that
Internet E-mail addresses cannot have spaces in them.
Enter your E-mail address and the IP address of your SMTP
E-mail server (consult your network administrator if you do not
know this address). Also specify if you are going to use the
Partial E-mail Print option and the Notification type.
10 Press OK to continue. You will then be asked to re-start your
computer.
11 Once your computer has re-started you must create a printer on
your Windows
® 98/Me/2000/XP system using the standard
Windows ® 98/Me/2000/XP printer setup procedure. To do this,
go the Start button, select Settings and then Printers
(Windows
® 98/Me/2000/XP). To do this, go to the Control
Panel, select Printers and Other Hardware and then Printers
and Faxes (or Add a printer)(Windows
® XP)
12 Select Add Printer to begin the printer installation.
13 Click Next when you get the Add Printer Wizard window.
® 98/Me users>
14 Select Local Printer when you are asked how the printers are
connected to your computer and push Next.
® 2000/XP users>
14 Select Local Printer, and then delete the check mark in Plug
and Play check box.