Brother Internet Fax - Manual (Page 39)

3 - 5 CONFIGURING INTERNET PRINTING FOR WINDOWS ®
NC9100h_FM6.0
8 If you have enabled notification, enter the address of your SMTP
server (consult your network administrator if you do not know
this address).
9 Press the OK button and save the changes. Now exit the
BRAdmin Professional utility. You have now configured the
Print/Fax server to receive print jobs.
Brother Internet Print
Installing the BIP software on
Windows ® 98/Me/2000/XP
To install the BIP software on a Windows ® 98/Me/2000/XP PC,
execute the following steps:
Setup from CD-ROM
1 Start the CD-ROM installation menu program according to the
Quick Setup Guide.
2 Select the proper model and Software Installation menu. Then
select the Network Print Software menu to start the Brother
Network Print Software installation program.
3 Push the Next button in response to the Welcome message.
4 Select the Brother Internet Print button.
5 Select the desired directory to install the BIP files and then push
Next. The installation program will create the directory for you if
it does not already exist.
6 You will then be asked for a port name. Enter the name of the
port. The port name must begin with the BIP and end with a
number, for example, BIP1.
■ Be sure that the PC is running an E-mail program (for
example, Microsoft Outlook) that is capable of sending
E-mail message using Winsock.
■ Be sure that your E-mail server is capable of sending
messages across the Internet.