INFICON Cool Drawer Single Sensor - Manual (Page 15)

1 - 5
PN
07
4-
60
9-
P1
A
Cool Drawer Single and Dual Sensors Operating Manual
1.5.1 Specifications
Maximum bakeout temperature with no water
O-ring compression fitting terminations . . . . . . . . . . . . . . . .165°C
Welded terminations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200°C
Maximum operating isothermal environment
temperature with minimum water flow
O-ring compression fitting terminations . . . . . . . . . . . . . . . .300°C
Welded terminations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .450°C
1.5.1.1 Size
Maximum envelope
without shutter . . . . . . . . . . . . . . . . . Standard Sensor
3.38 x 3.07 x 1.80 cm
(1.33 x 1.21 x 0.71 in.)
See
Figure 1-5 on page 1-9 .
Right Angle Sensor
3.24 x 3.63. x 1.80 cm
(1.27 x 1.43 x 0.71 in.)
See
Figure 1-5 on page 1-9 .
Length of sensor. . . . . . . . . . . . . . . . 10.2 to 66.0 cm (4 to 26 in.)
Water and conduit tubes. . . . . . . . . . 3.175 mm (1/8 in.) OD
seamless stainless steel,
0.406 mm (0.016 in.) wall thickness
Crystal exchange . . . . . . . . . . . . . . . Side loading, self-contained package
Crystal . . . . . . . . . . . . . . . . . . . . . . . 14 mm (0.550 in.) diameter
Mounting. . . . . . . . . . . . . . . . . . . . . . Two #4-40 tapped holes on the back of the
sensor body