INFICON STC-2002 Thin Film Deposition Controller Quick Start Guide - Manual (Page 6)

STC-2002 Quick Start Guide
Sycon Instruments, Inc.
instruments
To switch from Sequencing to Non-sequencing or vice-versa:
Press the fixed “Menu” button to view the Menu screen.
Press “Service” on the touchscreen to view the Service menu.
Non-sequencing: Sequencing:
Press to toggle
Press “Accept” on the touchscreen to accept the change. The STC-2002 will automatically
restart after the change is accepted.
To switch to or from Test Mode:
Press the fixed “Menu” button to view the Menu screen.
Press “Service” on the touchscreen to view the Service menu.
Press to toggle
Press “Accept” on the touchscreen to accept the change. The STC-2002 will automatically
restart after the change is accepted.
6
6757 Kinne Street
• East Syracuse, New York 13057-1215 • (315) 463-5297 • Fax (315) 463-5298