INFICON 3000 Micro GC Gas Analyzer Reference Guide User Manual
Page 56
15 - 2
PN
07
4-
55
8-
P1
A
3000 Micro GC Guides
6
To calibrate, click Analysis >> Analysis/Single Level Calibration.
7
The Analysis/Single Level Calibration window will display.
8
In the Sample ID: box, type the sample identification, if not already present.
9
In the Method: box, select the name of the method to be calibrated, if not already present, by
clicking the Open file icon adjacent to the field.
10
In the Data path: box, select the data path name, if not already present, by clicking the Open
file icon adjacent to the field and selecting the desired data path.
11
In the Data file: box, select the file name, if not already present, by clicking the Open file icon
adjacent to the field.
12
The Amount values are to remain set to 1; a value of 1 corresponds to a single level calibration.
13
Select the Calibrate setting and type 1 for Calibration Level. Select Average replicates.
NOTE: For the initial calibration, it is not necessary to select boxes that involve clearing
calibrations or replicates. However, if the method was previously calibrated and
the calibrated information needs to be replaced, select Clear all calibration.
Table 15-1 Conducting a calibration with replicates (continued)
Step
Description