Belkin F5D6230-3 - Manual (Page 22)

21
STEP 2: Connect your computers to Router
2. Connect a Belkin CAT5 Network Cable between each of your wired
computers and the Router.
Plug in a CAT5 network cable to the Ethernet port on each of the
other PCs and then to one of the ports labeled "LAN" on the rear of
the Router.
Note: It does not matter which LAN ports you connect your other
computers to, but be sure that you are not connecting any of the
computers to the port labeled "WAN".
3. Connect a Belkin CAT5 Network Cable between the Router and your
cable or DSL modem.
Plug in another cable to the port labeled "WAN" on the Router and
connect the other end of the cable to the cable or DSL modem’s
Ethernet port.