Belkin F5D6230-3 - Manual (Page 17)

16
STEP 1: Obtain information about your Internet Service
Provider (ISP) and your network
IMPORTANT:
IF YOU HAVE A CABLE OR DSL MODEM CONNECTED TO A PC AND
ARE NOW ADDING THE ROUTER TO YOUR NETWORK, FOLLOW
THESE STEPS TO OBTAIN INFORMATION YOU WILL NEED LATER.
If you are not connecting the Router to an existing cable or DSL modem,
skip to the next section called “Connecting the Belkin Wireless Router”.
Users of Windows 98 or Me can get the configuration information by
performing the following steps.
1. Turn on your computer and connect to the Internet through your cable or
DSL Modem.
2. In Windows 95, 98 and Me, Click “Start” then click
on “Run”.
3. In the Run dialog box, type “winipcfg” then click “OK”.
4. The IP Configuration window will appear.
5. In the drop-down menu, select your current Ethernet adapter by clicking
once on the down-facing arrow and highlighting your adapter’s name by
clicking on it once.