Hydro-Logic SuperLogic 2500 - Manual (Page 4)

370 Encinal Street, Suite 150, Santa Cruz, CA 95060
(888) 426-5644, Fax (831) 336-9840
www.hydrologicsystems.com
SuperLogic 2500 Manual
1 Based on membrane performance aŌ er 24 hours, 77°F (25°C), 500
ppm TDS, 120 psi and 66% recovery. Membrane performance may
vary ±15%.
Feed Pressure 40-80 psi
Max OperaƟ ng Pressure 150 psi
Temperature 40° - 100°F
Max Chlorine (conƟ nuous) <0.3 ppm
Max Total Dissolved Solids 5,000 ppm
Hardness <15 grains
Silt Density Index <5 SDI
Turbidity <1 NTU
pH Range 2-11
Silica < 1 ppm
Iron, Hydrogen Sulfi de or
Manganese
0 ppm
System Specifi caƟ ons
HL Model Number 31044
Capacity (gpd) 1 2,500
Membrane Type
4” x 21” high fl ow,
low energy, thin-fi lm
Number of Membranes 2
Membrane TDS RejecƟ on 1 96%+
Prefi lters
10” rinsable sediment (5 micron)
10” Green Carbon block (10 micron)
Pretreatment An -scalant cartridge
Pump 325 gph
Motor 3/4 Hp
Minimum Feed (GPM) 4 GPM
Feed ConnecƟ on Female garden hose
Brine ConnecƟ on 3/8” tube
Product ConnecƟ on 3/8” tube
Dimensions 18”W x 26”D x 30”H
Weight 100 lbs
Feed Water and OperaƟ ng Specifi caƟ ons
IntroducƟ on
Congratula ons on the purchase of your SuperLogic commercial reverse osmosis system. This is professional water purifi ca on
equipment which, with proper care and maintenance can last you for many years.
Feed water condi ons can vary dras cally as well as fl uctuate at your specifi c site. In order retain your warranty, the provided
opera ng log must be maintained and available for our review.
Prior to star ng up the SuperLogic reverse osmosis systems this user manual must be fully read and understood. Keep this
manual in a safe place for future reference. A copy of this manual can be found at www.hydrologicsystems.com.
Important Note: Feed water quality has a great eff ect on
the performance of your reverse osmosis. It is very im-
portant to meet the minimum feed water requirements.
Failure to do so will cause the membranes to foul and
void the warranty.
Please Note:
Higher TDS and/or lower temperatures will reduce the
systems performance
Detailed water analysis available. All levels of pre and
post fi ltra on available to match source water.
Call HydroLogic directly for assistance (888) 426.5644