Hydro-Logic Feed Valve 12025 - Manual

How to connect a compression thread feed valve
5
Connect and tighten the
line to the feed valve.
2
Disconnect the line from
the brass/chrome supply
valve.
3
Ensure the sealing gasket
is fully seated into the feed
valve female thread.
6
Fully insert the tubing into
the quick connect fitting
on the feed valve
1
Shut off water supply at
brass/chrome cold water
supply valve.
4
Install and tighten the
feed valve on the supply
valve.
7
Once all connections are
made open the supply
valve and check for leaks.
1/2" QC x 3/8" Comp.
Thread Tee Feed Valve
3/8" x 3/8" Comp.
Thread Tee Feed Valve
1/4" QC x 3/8" Comp.
Thread Tee Feed Valve
HL# 12025 HL# 12045 HL# 12010