Hydro-Logic Merlin-Garden Pro - De-Ionization Add-On Kit User Manual
Instructions
Included
-
(1) 10”x4.5” – DI cartridge with mixed bed, color changing
DI resin (anion resins to filter negatively charged ions and cation
resins to filter positively charged ions)
-
(1) 10”x4.5” filter housing with clear canister and black cap
-
(2) 3/8” Quick Connect fittings for in/out
-
(1) Powder coated metal wall mounting bracket
-
(4) Stainless steel screws for bracket
-
(1) 2 foot piece of white 3/8” tubing
-
(1) Filter housing wrench
Begin by mounting bracket to wall or other location using appropriate fasteners (not included). Splice the product water tube of your RO
system and install DI filter. The RO product water will go through the DI filter and come out with 0 PPM of contaminants. The DI resin inside
the cartridge upon initial installation appears blue/green. Once the resin has exhausted its useful life and is no longer capable of removing
TDS it will turn brown/light brown. When this begin to happen it’s time to either replace the entire cartridge or to replace the DI resin inside
the cartridge. Adding another DI stage after this one will ensure the purest water at all times.
WARNING: THE DI CARTRIDGE NEEDS TO HAVE THE PLASTIC PACKAGING REMOVED PRIOR TO USE
This de-ionization filter is designed to serve as a post, polishing stage for any Reverse Osmosis system. After an RO system the product water
may contain trace amounts of nitrates, phosphates, and silicates as well other total dissolved solids (TDS). Certain applications such as
aquarium, medical, manufacturing and others require 99.99% ultra pure, 0 PPM water. This DI filter will remove any leftover contaminants
giving you the purest H2O available.
Instructions
If you have any questions please email: [email protected] or call us at 888-426-5644
Specs:
1 Gallon Per Minute maximum flow rate.
Estimate life is 18,750 Parts Per Million. Example:
Estimated number of gallons cartridge is good for at 5
PPM feed water is 3,750 gallons. Divide estimated
life by feed water PPM to get estimated
number of gallons.