HYDAC ETS 300 - Manual (Page 15)

12.2 For mechanical connection
ZBM 300 clamp for wall-mounting the ETS 300 (material: polypropylene)
Mounting:
· Glue damping strips into the recesses of
the base plate.
· Mount base plate, the top is indicated by
"OBEN", "TOP" and 2 arrows.
(illustration 1).
· Insert ETS 300.
· Fit clip (only one possible position) and
press hard on the cross-pieces until they
engage.
ZBM 310 clamp for wall-mounting the ETS 300 (material: polypropylene, aluminium AlSi12,
steel)
Mounting:
· Weld on base plate (steel)
· Mount ETS 300 according to illustration.