Brother XL-5032 - Manual (Page 9)

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
1
CONTENTS
KNO
WING Y
OUR
SEWING MA
CHINE
STRAIGHT AND
ZIGZA
G STITCHING
B
UIL
T
-IN STITCHES
BUTT
ONHOLE AND
B
UTT
ON SEWING
USING A
T
T
A
CHMENTS
AND APPLICA
TIONS
MAINTENANCE
INDEX
PRINCIPAL PARTS
1 Bobbin winding assembly
Winds the thread onto the bobbin to be used for the lower thread.
2 Spool pin
Holds the spool of thread.
3 Bobbin winding tension disc and thread guide
4 Thread take-up lever
5 Thread cutter
6 Upper tension control dial
Controls the tension of the upper thread.
7 Pattern selection dial
Turn in either direction to select the desired stitch.
8 Stitch length dial
Controls the length of the stitches.
9 Reverse sewing lever
Push for stitching in the reverse direction.
0 Buttonhole fine-adjustment screw
A Buttonhole lever (XL5030 and XL5020 only)
B Handle
C Balance wheel
Turn toward you (counterclockwise) to raise and lower the needle.
D Main power/sewing light switch
Turns the main power and sewing light on and off.
E Foot controller receptacle
Insert the foot controller plug for operation.
F Presser foot lever
Raises and lowers the presser foot.
G Foot controller
Used to control sewing speed start and stop.
2 1
A
4
5
9
8
7
0
G
D
E
B
F
3 6
C