Brother XL-5032 - Manual (Page 62)

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
54
CONTENTS
KNO
WING Y
OUR
SEWING MA
CHINE
STRAIGHT AND
ZIGZA
G STITCHING
B
UIL
T
-IN STITCHES
BUTT
ONHOLE AND
B
UTT
ON SEWING
USING A
T
T
A
CHMENTS
AND APPLICA
TIONS
MAINTENANCE
INDEX
Button Sewing
XL5030 XL5020 XL5010 Pattern Stitch Length Foot
4, 5, 6 4, 5, 6 2, 3, 4 Zigzag Stitch Any
Button
Sewing Foot
1. Measure the distance between the holes and select the appropriate
pattern with the pattern selection dial.
Distance between holes Pattern
1.7 mm (1/16") 4 4 2
3.5 mm (9/64") 5 5 3
5 mm (13/64") 6 6 4
XL5030 XL5020 XL5010
2. Attach the button sewing foot.
3. Place the darning plate on the needle plate.
(When the machine is equipped with a drop feed lever, lower the
feed dogs by setting the drop feed lever to the up position.)
4. Place a button between the foot and the fabric and make sure that
the needle enters the holes without hitting the button. If it hits, see
step 1.
5. At a slow speed, sew approximately 10 stitches.
6. Remove the material from the machine. Cut the upper and lower
threads and tie the two threads at the back of the fabric.