Heidolph SilentCrusher M - Manual (Page 50)

- 50 -
E
E
TECHNICAL DATA
SilentCrusher M
Characteristics Values
Connection Voltage 100
– 230 V 50 / 60 Hz
Power Consumption (Rated Output) 130 W
RPMs 5000 – 26000 rpm, referred to water
Operating Modes Short-term operation
Drive Protection Overheating protection switches drive unit
off in case of overheating; red control light
indicates this condition. Reset with start-
stop key.
Control Light for “Device On”
CONTROL LIGHT (green) on power supply
Dimensions (in mm) Drive Unit Width 68; Height 160; Depth 75
Retainer Rod 10 x 100
Dimensions (in mm) Power Supply Width 145; Height 43; Depth 75
Total weight 1.9 kg
Operating Temperature 0
– 40 °C
Storage Temperature - 20 to + 80 °C
Relative Humidity 85 % (without condensation)
Type of Protection according to EN
60529 IP 30
Level of Protection according to VDE
0100 I
Dispersion Tool 6 F
Characteristics Values
Part Number 596-06010-00
Stator Diameter [mm] 5,3
Rotor Diameter [mm] 3,2
Gap Width Generator/Rotor [mm] 0,3
Width of Slot [mm] 0,6
Total Shaft Length [mm] 60
Maximum Immersion Depth [mm] 48
Minimum Immersion Depth [mm] 20
Volume [ml] 0,8-30
Peripheral Speed [m/sec] 4,4
Initial Particle Size [mm] < 0,4
Material PTFE / 1.4435
Sterilization Up to 130°C with wet chemicals; up to
180°C dry
Dispersion Tool 8 F