GeoDesy FSO Giga Next series - Manual (Page 8)

GeoDesy Kft. Telefon: 06-1-481-2050
H-1116 Budapest, Kondorfa str. 6-8. Fax.: 06-1-481-2049
E-mail: [email protected]
http://www.geodesy-fso.com
8
Horváth Holding
Investment PLC.
2 Interfaces for the X Series
2.1 1000Mbps TP interface
The
GeoDesy FSO X PoE series products are designed to provide easy-to-use
and cost-effective solution for interconnecting Local Area Networks. By utilizing
standard Category 5e cable and using standard IEEE802.3af interface the
deployment of the system is easier than ever before. The transparent and wire
speed data transfer together with virtually zero latency assures the easy integration
of the system in all environments.
The
X PoE systems should be considered as repeaters in the network. So the
installation distance between the head and the network device is 100m. The
distance on a back to back site is maximum 5 meters, between the heads without
signal regeneration.
The
X PoE systems connecting to the network with two RJ 45 cable which provides
the power required for operation and the data. The system requires IEEE 802.3af
Power over Ethernet switch or power injector. The power consumption suits to the
standards described in the standard. Also provides fast and easy connection for the
management system for more details please see the chapters below. The system is
certified
Class 1M product , this way 100% eye safe.
2.2 1000 Mbps FO interface
As a new feature the GeoDesy FSO Giga Next POE system is ready to be upgraded
with Single or Multi mode SC fiber interface with SX or LX option.
The power is provided via the same cable as in the case of the TP interface
systems.