General Machine Products 89010 Breeze Micro Fiber Cable Blowing Machine - Manual (Page 9)

Page 9 of 43 General Machine Products Co., Inc.
3. GENERAL DESCRIPTION
The Breeze Micro Cable Blowing Machine is designed to install small diameter cable into
micro tubes.
The Breeze uses a DC motor and reduction gearing to
drive a pair of compliant rollers that are both driven.
The rollers are covered with a soft synthetic coating to
prevent damage to the cable. Different coatings are
available depending on the surface texture of the cable
being installed. The rollers may be changed quickly us-
ing one simple tool.
The pressure the rollers apply to the cable is adjusta-
ble.
The torque applied to the cable by the rollers can be
adjusted to help prevent cable buckling.
A full range of accessories is available to allow the machine to handle a wide range of cables
and micro tubes.
As pictured, the Breeze may be placed on the
ground or on a support to bring the cable to a
suitable height. The Breeze is supplied with a
reinforced case which will protect the machine
from damage during transit and can also be used
as a support for the machine when installing ca-
ble.