General Machine Products 89010 Breeze Micro Fiber Cable Blowing Machine - Manual (Page 32)

Page 32 of 43 General Machine Products Co., Inc.
Cable size (O/D) Photo 2.5-3.0mm
(.098”-.118”)
3.0-3.8mm
(.118”–.150”)
3.8-5.0mm
(.150”–.197”)
5.0-6.4mm
(.197”–.250”)
6.4-8.0mm
(.250”–.315”)
8.0-8.5mm
(.315”–.335”)
Infeed Guide
Insert Set
A
2.5-3.0
32885
3.0-5.0
32886
3.0-5.0
32886
5.0-8.0
32883
5.0-8.0
32883
8.0-8.5
33530
Seal Guide
Half Set
B
2.5-3.0
32889
3.0-3.8
32890
3.8-5.0
32891
5.0-6.4
32884
6.4-8.0
32892
8.0-8.5
33531
Cable seal
(5/pk)
C 89510 89511 89512 89513 89514 89515
1. APPENDIX 1
This section lists the appropriate inserts, collets, etc required for a given cable/tube combination.
The italicized numbers in the table are cable/tube identification numbers which are marked on the
individual components. (Twelve count (1.6mm) conversion is found on page 25.)
A D
B E
C F
G
NOT TO SCALE
Tube Kits (D,E,F,G Included)
Tube O.D P/N
5 mm 89539
8 mm 89540
8.5 mm 89537
10 mm 89541
12 mm 89542
12.7 mm 89543
14 mm 89538
16 mm 89544
18 mm 89536
Cable Kits (A,B,C Included)
Cable Size P/N
2.5 - 3.0 mm 89530
3.0 - 3.8 mm 89531
3.8 - 5.0 mm 89532
5.0 - 6.4 mm 89533
6.4 - 8.0 mm 89534
8.0 - 8.5 mm 89535
Tube size (O/D) Photo 5.0mm 8.0mm 10.0mm 12.0mm 16.0mm 12.7mm 18.0mm 8.5mm
In-Feed Guide
Set
D 32878 32893 32881 32909 32909* 32913 32909* 33534
Micro Duct
Seals (5 pk)
E 89549 89550 89551 89552 89554 89552 89536 89550
Airbox Set F 32879 32888 32882 32908 32915 32912 33532 33535
Insert Clamp
Set
G 32874 32894 32880 32911 32917 32914 33533 33536
Cable Guide Sets
Cable Range P/N
2.5 - 3.8 mm 89520
3.8 - 8.5 mm 89521
*
In-feed Guide sets provided with a section of 12mm duct