Blaupunkt BREMEN MP74 US - Manual (Page 46)

46
AMPLIFIER/SUB-OUT
Amplifier/sub-out
The car sound system provides connec-
tions that allow you to connect external
amplifiers. You can also connect a sub-
woofer to the device’s integrated low-
pass filter. In order for this to work, the
amplifier and subwoofer must be con-
nected in the manner described in the
installation instructions. We recommend
you use well-matched products from the
Blaupunkt or Velocity product ranges.
Switching the internal amplifier
on/off
If you use external amplifiers, you can
switch off the device’s internal amplifier
(“INTERNAL AMP OFF” setting).
Note:
●
Please check this setting if the
loudspeakers do not emit any
sound.
➮
Press the MENU button
9
.
➮
Press the softkey
5
assigned to
the “VARIOUS” display item.
➮
Repeatedly press the softkey
5
assigned to the “AMP ON” display
item until the “INTERNAL AMP ON”
or “INTERNAL AMP OFF” setting
that you want is displayed. The
“AMP ON” softkey will be displayed
with a dark background if the inter-
nal amplifier is switched on.
➮
Press the joystick OK
8
or the
MENU button
9
to close the
menu.
The settings are saved.
External audio sources
You can connect up to two external au-
dio sources to the device. Audio sourc-
es can, for example, be portable CD
players, MiniDisc players or MP3 play-
ers.
You can connect the first external au-
dio source (AUX1) instead of a CD
changer.
You can connect the second external
audio source (AUX2) in addition to the
CD changer or AUX1.
Instead of AUX2, you can connect a
navigation system. For further informa-
tion, please read the section entitled
“Navigation audio” in the “Adjusting the
volume” chapter.
In order to be able to use the AUX in-
puts, you must activate them in the set-
up menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable from a
Blaupunkt dealer.
Switching the AUX input on/off
➮
Press the MENU button
9
.
➮
Press the softkey
5
assigned to
the “AUX” display item.
The AUX menu is displayed.
➮
Press the softkey
5
assigned to
the “AUX1” display item if no CD
changer is connected and you
want to connect an external audio
source.
EXTERNAL AUDIO SOURCES