Blaupunkt BREMEN MP74 US - Manual (Page 20)

20
RADIO MODE
RDS function
The RDS function extends your radio’s
range of functions (only in FM radio
mode). If the RDS function is activated,
the device automatically tunes into the
best receivable frequency for the sta-
tion that is currently set.
Switching the RDS function on/off
To use the RDS function,
➮
press the TUNER button
=
while
in radio mode.
The radio functions menu appears in the
display.
➮
Repeatedly press the softkey
5
assigned to the “RDS” display item
until the “RDS ON” or “RDS OFF”
setting that you want is displayed.
To return to the main radio menu,
➮
press the TUNER button
=
or the
joystick OK
8
.
The settings are saved.
Selecting the waveband /
memory bank
You can use this device to receive pro-
grammes broadcast over the FM, AM
and SW wavebands. There are four
memory banks for the FM waveband,
three memory banks for the AM wave-
band and one memory bank for SW.
You have up to five memory banks at
your disposal in dynamic radio mode.
Six stations can be stored in each mem-
ory bank.
Selecting the waveband
To select the FM, AM or SW waveband,
➮
press the TUNER button
=
while
in radio mode.
The radio functions menu appears in the
display.
➮
Press the softkey
5
assigned to
the “BAND” display item.
➮
Press the softkey
5
assigned to
the “FM” display item for the FM
waveband.
➮
Press the softkey
5
assigned to
the “AM” display item for the AM
waveband.
➮
Press the softkey
5
assigned to
the “SW” display item for the SW
waveband.
The main radio menu for the selected
waveband is displayed.
Selecting an FM/AM memory bank
To switch between the FM memory
banks (FM1, FM2, FM3 and FMT) or
AM memory banks (AM1, AM2 and
AMT),
➮
press the NEXT button
4
repeat-
edly until the memory bank that
you want appears in the display.
The memory banks are accessed in the
following order: FM1, FM2, FM3, FMT
or AM1, AM2, AMT.