Blaupunkt BREMEN MP74 US - Manual (Page 22)

22
Setting the scanning time
➮
Press the MENU button
9
.
➮
Press the softkey
5
assigned to
the “VARIOUS” display item.
➮
Press the softkey
5
assigned to
the “SCANTIME” display item.
➮
Move the joystick
8
up/right or
down/left to adjust the scanning
time.
➮
Press the joystick OK
8
or the
MENU button
9
to close the
menu.
The settings are saved.
Note:
●
The scanning time that you set is
also applied by the system to scan-
ning carried out in CD/MP3 mode
and CD-changer mode.
Storing stations
Storing stations manually
➮
Select the memory bank that you
want (FM1, FM2, FM3, FMT or
AM1, AM2, AMT) or the SW wave-
band.
➮
Tune into the station that you want
as described in the section entitled
“Tuning into a station”.
➮
Press one of the six softkeys for
longer than two seconds to assign
the station to that softkey.
Storing stations automatically
(Travelstore)
In static radio mode you can automati-
cally store the six stations providing the
best reception in the region (only FM
and AM). The stations are stored in the
FMT or AMT memory bank.
Note:
Any stations that were previously stored
in this memory bank are deleted in the
process.
Starting the Travelstore function
➮
Press the TUNER button
=
while
in radio mode.
The radio functions menu appears in the
display.
➮
Press the softkey
5
assigned to
the “T-STORE” display item.
The storing procedure begins. “TRAV-
EL STORE” appears in the display.
After the process is completed, the ra-
dio will play the station that is stored in
location 1 of the FMT (or AMT) memory
bank.
Listening to stored stations
➮
Select the memory bank or wave-
band.
➮
Press the softkey
5
that is as-
signed to the station name or fre-
quency of the station that you want
to listen to.
RADIO MODE