Blaupunkt BREMEN MP74 US - Manual (Page 12)

12
Activating navigation audio
You can either connect a second exter-
nal audio source or a navigation sys-
tem to this device. If you do, you must
specify which device is connected to this
connection by selecting it in the menu.
➮
Press the MENU button
9
.
➮
Press the softkey
5
assigned to
the “AUX” display item.
The AUX menu is displayed.
➮
If you have a navigation system
connected, repeatedly press the
softkey
5
assigned to the “NAV/
AUX2” display item until the “NAVI-
GATION ON” setting appears.
➮
Press the joystick OK
8
or the
MENU button
9
to close the
menu.
The settings are saved.
Setting the minimum navigation
volume
You can set the volume level at which
the navigation voice output is “mixed in”
with the audio source.
Note:
●
Set the volume on the navigation
system to maximum. If the output
sounds distorted, reduce the vol-
ume slightly on the navigation sys-
tem.
➮
Press the MENU button
9
.
➮
Press the softkey
5
assigned to
the “VOLUME” display item.
ADJUSTING THE VOLUME
➮
Press the softkey
5
assigned to
the “NAVI DIFF” display item in or-
der to adjust the volume.
➮
Set the volume level that you want
using the volume control
2
.
➮
Press the joystick OK
8
or the
MENU button
9
to close the
menu.
The settings are saved.
Note:
●
You can also adjust the volume
during the voice output using the
volume control
2
. This setting
only applies to the current voice
output and is not saved.