Floating pond pump system, Nozzle patterns, Il0807 – Flint & Walling 230V Pond and Fountain Systems FPS10021 User Manual
Page 5
![background image](/manuals/560815/5/background.png)
5
95 North Oak St. • Kendallville, IN 46755 • 800-742-5044 • © 2012 All rights reserved.
NOZZLE PATTERNS
Th
is
si
de
up
IL0537
Th
is
si
de
up
Th
is
si
de
up
Figure 1 - Water Lily: (Factory Installed)
An eye-catching combination spray.
Item #2A
Th
is
si
de
up
IL0537
Th
is
si
de
up
Th
is
si
de
up
Figure 2 - Sky Cannon: A dramatic single
plume of water. Item #2
Th
is
si
de
up
IL0537
Th
is
si
de
up
Th
is
si
de
up
Figure 3 - Water Trumpet: A symmetrical
inverted bell shape. Item #2C
IL0807
Figure 5 - Dimensions
8.0"
20"
24"
28"
32"
36"
40"
100 Ft. Power Cord
14.5"(1/2 HP)
20.0" (3/4 & 1 HP)
1/2 HP
3/4 HP
1 HP
1/2 HP
3/4 HP
1 HP
Floating Pond Pump System
Operating Instructions and Parts Manual
IL0806
Figure 4 - Typical Installation
Disconnect - Install in compliance with
local and national electric codes.
Control center
3 Ft. Minimum above
ground and 3 ft.
minimum above high
water level in flood
zone.
To
service
panel
Power cord may
require burial.
Refer to local
codes
5 ft. minimum from
shoreline during
maximum flood condition
15 - 20 ft.
5 ft.
minimum
depth
Pond pump float
Nylon rope secured to weights can
be attached to stakes on shore. Two
required.