EUCHNER MGB-L2-xxxAPx-xxx - Manual (Page 17)

17
Operating Instructions MGB-L1...AR.-... / MGB-L2...AR.-... and MGB-L1...AP.-... / MGB-L2...AP.-...
AP
9 Protection against environmental effects
Lasting and correct safety function requires that the system must be protected
against foreign bodies such as swarf, sand, blasting shot, etc., which can become
lodged in the locking and handle modules. For this purpose a suitable installation
position should be selected.
Cover device during painting work!
3 mm
9
10
OPEN
CLOSED
9 Loosen the setscrew
AT Reposition the door handle by 90° in clockwise direction and
fasten it again. Tighten setscrew to 2 Nm. AK State after repositioning
Figure 13: Changing actuating direction, step 9 and AT Figure 14: Changing actuating direction, final state