ETC Desire Series v1.6.0 Quick Guide (D22, D40, D40XT, D60) - Manual (Page 3)

E T C D e s i r e Q u i c k G u i d e
Desire D22, D40, D40XT, D60 v1.6.0
D22, D40, D40XT, D60 v1.6.0 Quick Guide Page 3 of 8 Electronic Theatre Controls, Inc.
Focus
Step 1: Supply power and wait for the
fixture to boot up.
Step 2: Press [ ] to open Presets &
Sequences.
Step 3: Select Focus and press [ ]
to turn on LED array.
Step 4: Adjust fixture's position.
Step 5: Once focus is set, press [ ]
to turn off LED array and then
[
] to return to home screen.
Address
Step 1: From the home screen, press [ ] to open Main Menu.
Step 2: On the Main Menu, scroll to DMX Start Address, press [ ].
Step 3: Use [ ] or [ ] to scroll to desired address.
Step 4: Press [ ] to select address number.
Step 5: Press [ ] to return to home screen.
* DMX address is not needed if using standalone or master/slave control.
Features Quick Setup
Step 1: On the Main Menu, scroll to Quick Setups.
Step 2: Press [ ].
Step 3: Scroll to the desired setup and then press [ ].
An asterisk (*) indicates which setup is active.
Step 4: Press [ ] to return to the home screen.
The top line of the home screen displays the name of the active setup.
Individual features and settings are adjustable under the Advanced menu. Consult the User Manual for
more information on advanced features of Desire fixtures.
Quick Color (Vivid, Lustr+, Fire and Ice, Studio HD)
Quick Color allows you to easily select a color and its intensity from a predefined menu. This
feature overrides any presets or sequences previously selected and is only available when
there is no external DMX signal to the fixture.
N o t e : For setup of D22 track and canopy mounted fixtures, see the D22 Installation Guide.
ETC documentation can be downloaded at www.etcconnect.com .
N o t e : Exiting the Quick Color menu will return the fixture to the state it was in prior to entering
the menu.