Eschenbach Optik Eclipse Touch - Manual (Page 3)

Page 1
Important Safety Information
Please read all of the following instructions before setting
up your Eclipse Touch. Failure to follow these instructions
properly could lead to physical injury.
• The Eclipse Touch must be used on a flat, level table. Never attempt to use it on a
sloping surface or on a table that cannot accommodate the full footprint of the unit.
• The front of the Eclipse Touch must be placed at least 10cms or 4 inches back
from the edge of the table. This is to prevent the unit from tipping forward if
excessive weight is placed on the reading table when fully extended. There are
warning labels placed on the reading table with arrows indicating the maximum
overhang permissible when the table is fully extended.
• Both X/Y table and Screen contain moving parts. Please take care with folding
back the screen and operating the X/Y table. If fingers get caught, injury might
occur. If you feel you cannot operate the unit safely, please seek advice or contact
your supplier.
• Never lift the Eclipse Touch by the reading table.
• To prevent fire or electric shock please ensure this unit is kept away from all
liquids. Do not use the unit in excessively damp or wet areas and do not expose it
to rain, snow, etc.
• Before cleaning the unit, please ensure that it is unplugged. Use a slightly damp
cloth to clean the exterior. Do NOT use solvents or aerosol cleaners.
• This unit should never be opened. It contains hazardous voltages. Unauthorized
servicing will invalidate your warranty. If you encounter any problems with this unit
please contact your local dealer.
• While we have made every effort to minimize the weight of this unit, if you feel you
cannot safely lift it, seek help when moving it.
• Before moving the unit, unplug the power adapter, ensure the screen is folded
back and the reading table is parked home with the brakes applied.
• Use only with the power adapter provided.
• Never place any object on the screen. The screen can be scratched or cracked
and damage to it is not covered under warranty.
• The unit is designed for use in the Residential Commercial & Light Industry.
• Use near other non-light industrial transmitters is not a foreseen use of the
product.