Eschenbach Optik Eclipse Touch - Manual (Page 13)

Page 11
into a mode that you cannot remember how to undo. You will be
prompted to press the
button on the front panel to reset the unit;
pressing any other button will exit without altering the current settings.
The lighting under the unit can be switched on and off if
required. You can switch off the lights if you wish to view an
illuminated object (e.g. mobile phone) or if you want to use your
own source of illumination. For correct operation the Eclipse Touch
requires good lighting.
This choice removes the icon from the lower left corner of the
display indicating where to press for the menu. It does not
prevent the menu from being displayed if the area is touched.
DECLARATION OF CONFORMITY
We, Ash Technologies Ltd., declare under our sole responsibility that this product, Eclipse Touch, of the brand
Ash Technologies to which this declaration relates, is in conformity with the following standards or other normative
documents:
EN60601-1-2:2001 - Medical Electrical Equipment
EN 55022:1998 + A1:2000 + A2:2003 ITE – Radiated emissions
EN 55024:1998 + A1:2001 + A2:2003 ITE – Immunity characteristics
following the provisions of EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC and the Medical
Directive 93/42/EEC.
Alan Johnston
Engineering Director
Ash Technologies Ltd, Naas, Ireland.
16
th
October 2009