Eschenbach Optik Eclipse Touch - Manual (Page 10)

Page 8
“Hotspots”
The touch screen is normally inactive except for two areas (hotspots):
• the lower left corner of the display will bring up the on-screen
menu.
• the top centre will turn line-markers or blanking off if they have
been enabled. Touching again will re-enable them.
6. The Touch Screen Menu
Press the screen in the lower left corner where the icon of a hand
is shown. The on-screen menu will appear. The functions of the
various icons are explained below. Press the icon of your choice to
execute the function. If you do not touch the screen for a five second
period, the menu will exit automatically.
6A. Video Controls menu
The items in the Video Controls menu are explained below.
Choosing any of the icons will bring up a graphic at the bottom of
the display that allows adjustment of that attribute. Press the
arrows to the right and left to increase or decrease the attribute. The
control will exit automatically after five seconds or by pressing within the
top half of the display.
Brightness: This control affects the overall level of light coming
from the image. The brightness settings for picture mode and
reading mode are independent and stored separately.
Contrast: The contrast control increases the difference between
bright and dark areas, making bright areas brighter and dark