ElmoMC SimplIQ Analog Servo Amplifiers-Violin Installation - Manual (Page 10)

Violin Installation Guide
MAN-VIOIG (Ver. 2.3)
3-1
Chapter 3: Installation
3.1 Site Requirements
You can guarantee the safe operation of the Violin by ensuring that it is installed in an
appropriate environment.
Feature Value
Ambient operating temperature
0 °C – 50 °C (32 °F – 122 °F)
Maximum case temperature 87 °C (188° F)
Note: Models for extended environmental conditions are available.
3.2 Unpacking the Amplifier Components
To unpack the Violin:
Carefully remove the servo amplifier from the box and the Styrofoam.
1. Check the amplifier to ensure that there is no visible damage to the instrument. If
any damage has occurred, report immediately to the carrier that delivered your
amplifier.
2. To ensure that the Violin you have unpacked is the appropriate type for your
requirements, find the part number sticker on the side of the Violin:
The P/N number at the top gives the type designation as follows:
VIO-XX/YYY V
.
Mode
_ = Current
V = Velocity Maximum
Operating
Voltage
Continuous
Output
Current
3. Verify that the Violin type is the one that you ordered, and ensure that the voltage
meets your specific requirements.