Eberspacher EasyStart T - Manual (Page 3)

3
Safety information
Danger!
– All information and notes, in particular
the safety information in the heater’s
technical description must be observed
at all times!
– The heater must be switched off when
refuelling.
– Only use original spare parts.
Important Information
Please read fi rst
Please ensure you read through these
operating instructions carefully before you
start to set and use the timer.
These operating instructions contain
important information, which you require
to set and use the timer.
Please store these operating instructions
in a safe place so you can refer to them at
a later date.
Purpose
The EasyStart T timer is used to switch
on / off and preset the switching on time,
operating time and operating mode of the
heater and / or add-on unit installed in
the vehicle.
Improper use and use outside the speci-
fied area of use cancels all liability and
warranty.
Please note!
General information
The timer has a simple control structure.
With only 4 keys, it is possible to set all
functions, change them if necessary and
program the preset times.
We recommend use of the temperature
sensor, available as an option, in order to
be able to utilise all the timer’s functions.
If a vehicle was disconnected from the
power supply (battery disconnected) and
the power supply is reinstated, the time
appears when the timer is activated. This
must then be adjusted. See descrip-
tion on page 8 “Set weekday, time and
operating time”.
Operation of the timer is described in
detail from page 6.