Eberspacher EasyStart T - Manual (Page 23)

23
What to do if …?
If you are unable to remedy the fault
or error, please contact an authorised
JE workshop or dial the service phone
number given on page 24.
Please note!
Possible cause
ADR mode is active. It is not permitted to program preset times in this mode
( is not available in the menu bar).
Preset time cannot be programmed / display disappears
It is not possible to program a preset time.
Possible cause Remedy
Terminal 58 (lighting) not connected. Connect terminal 58 (lighting).
Display disappears.
Description
Radio remote control is in teach mode.
Possible cause Remedy
Timer has been disconnected from the
voltage and reconnected.. Wait until teach mode has ended.
Anzeigen
(only for combinations of 2 controls EasyStart R+ / T, R / T )