Eberspacher EasyStart T - Manual (Page 18)

18
Operation and Adjustment
Program preset times
Display
The assigned preset memory locations
appear in the display. The next preset
memory to be activated is underlined in
the display and the corresponding week-
day is also displayed. The same procedure is required to pro-
gram preset times in the preset memory
2 and 3.
Please note!
The following actions are possible:
• Switch from temperature display to time and back,
press .
• Select functions in the menu bar with or ,
confirm selection with .
The further procedure is described in the relevant sec-
tion for the selected function.
The operating time is only displayed if (heat with
deactivated runtime calculation), or is selected
and can be accepted with or adjusted with or
and confirmed with .
The adjustment is completed.