4 road operation, 4 road operation -10 – Deutz-Fahr Agrovector 35.7 User Manual
Page 76
Section 4 - Operation
4-10
31200570
4.4
ROAD OPERATION
1. Preparation
a. Remove load from attachment.
b. Remove any large amounts of dirt from machine.
c. Check lights and mirrors and adjust if necessary.
d. Safety equipment to be carried: Warning Triangle, First Aid Kit and
Wheel Chock.
2. Lower boom. Front edge of attachment should be approximately 30-40 cm
(12-16 in) above the ground.
3. Fully tilt attachment back.
4. Place protective shield over front bucket edge: remove or reposition carriage
forks toward the machine and secure to the carriage.
5. Depress button (2) to deactivate joystick function and disable all joystick
controlled functions. Joystick function LED will go out.
6. Deactivating the joystick function automatically changes steer mode to front
wheel steering (1). See “Steer Modes” on page 3-26 for details.
7. Machine is now ready for road operation.
Note: Be sure to follow all local and federal/provincial traffic regulations.
OZ2171
1
2