Normal engine operation, Shut-down procedure, Normal engine operation -3 shut-down procedure -3 – Deutz-Fahr Agrovector 35.7 User Manual
Page 69
Section 4 - Operation
4-3
31200570
Normal Engine Operation
• Observe instrument panel and display frequently to be sure all engine systems
are functioning properly.
• Be alert for unusual noises or vibration. When an unusual condition is
noticed, park machine in safe position and perform shut-down procedure. Report
condition to your supervisor or maintenance personnel.
• Avoid prolonged idling. If the engine is not being used, turn it off.
Shut-Down Procedure
When parking the telehandler, park in a safe location on flat level ground and away
from other equipment and/or traffic lanes.
1. Apply the park brake.
2. Shift the transmission to “Neutral.”
3. Lower forks or attachment to the ground.
4. Operate engine at low idle for 3 to 5 minutes. DO NOT over rev engine.
5. Shut off engine and remove ignition key.
6. Exit telehandler properly.
7. Block wheels (if necessary).