Deutz-Fahr Agrovector 35.7 - Manual (Page 61)

Section 3 - Controls and Indicators
3-27 31200570
Rear Wheel Assisted Steering Alignment Mode Change
If rear wheel assisted steering alignment mode is active under the Operator Tools
menu (see page 3-7), use the following procedure for steer mode change.
1. Bring machine to a stop using service brake.
2. Turn the steering wheel until the left front wheel (5) is aligned with the side of
the machine. This step can be skipped if changing to front steer mode.
3. Select desired steer mode: circle steer (1), front steer (2) or crab steer (3).
Note: Selected steer mode LED will flash and display will show steering alignment
screen until the change is complete. After steering alignment is complete, steer
mode LED will illuminate solid.
4. Turn the steering wheel until the rear wheels are centered (6). This step will be
skipped if changing from front steer mode and rear wheels are already
centered.
5. Wheels are now aligned and steer mode change is complete (9).
OAH1450
5
OAM2381
1 2 3
OAH1440
6
00
0000
0000
00 F1
RPM
km/h