Hydraulic oil, Hydraulic oil -13 – Deutz-Fahr Agrovector 35.7 User Manual
Page 133
Section 7 - Lubrication and Maintenance
7-13
31200570
Hydraulic Oil
A. Hydraulic Oil Level Check
1. Be sure all cylinders are fully retracted and machine is level.
2. Perform “Shut-Down Procedure” on page 4-3.
3. Open engine cover.
4. Check level of hydraulic oil at the sight gauge (6) on the hydraulic tank (5). The
oil level should be visible in the gauge window.
5. If hydraulic oil is low, remove oil fill cap (7) from filler neck. Add hydraulic fluid to
bring oil up to the upper mark on the sight gauge.
6. Replace hydraulic oil fill cap.
7. Close and secure engine cover.
10
OW0970
OW1030
OAH0071
5
7
6
This manual is related to the following products: