Deutz-Fahr Agrovector 30.7 - Manual (Page 70)

Section 4 - Operation
4-10 31200114
4.4 ROAD OPERATION
1. Preparation
a. Empty bucket.
b. Remove any large amounts of dirt from machine
c. Check lights and mirrors and adjust if necessary.
d. Safety equipment to be carried: Warning Triangle, First Aid Kit and Chock.
2. Lower boom. Front edge of attachment should be approximately 30-40 cm
(12-16 in) above the ground.
3. Fully tilt attachment back
4. Place protective shield over front bucket edge; remove or reposition carriage
forks toward the machine and secure to the carriage.
5. Select front wheel steering by rotating switch to the middle position (1). This
mode is required for road travel.
6. Select road use button (2) to disable all joystick controlled functions.
7. Machine is now ready for road operation.
Note: Be sure to follow all local and federal/provincial traffic regulations.
OAH0450
1
2