Deutz-Fahr Agrovector 30.7 - Manual (Page 38)

Section 3 - Controls And Indicators
3-4 31200114
Instrument Panel
1. Fuel Gauge: Indicates amount of fuel in fuel tank.
2. High beam Indicator: Illuminates while high beam lights are activated.
3. Turn Signal Indicator: Illuminates while activated.
4. Front Wheel Steering Mode: Illuminates while activated: The front wheels are
steering. This mode must be used on public roads.
5. Crab Steer Mode: Illuminates while activated: All wheels are steering in the
same direction.
6. All Wheel Steering Mode: Illuminates while activated: All wheels are steering.
The front wheels steer in the opposite direction from the rear wheels.
7. Engine Temperature Indicator: Do not exceed the critical coolant temperature of
102°C (221°F). Stop immediately and allow the engine to run at idle in order to
cool. (See engine manual.)
8. Battery Charge Indicator: Illuminates with the ignition key in position 1 and
briefly during starting. Illuminates during operation when battery is at low
charge.
9. Engine Oil Pressure: Illuminates when low oil pressure occurs. Stop engine
immediately.
10. Hydraulic Return Filter: Illuminates when filter requires maintenance.
11. Engine Pre-Heat Indicator: Illuminates with ignition key in position 1. At
temperatures below 0°C, do not start until indicator goes out.
12. Engine RPM Indicator: Indicates engine speed in revolutions per minute (rpm).
0
5
10
15
20
25
30
RPM X 100
0 0 0 0 0 0 h
OAH0160
16
8 9 10 11 13 12 14
15
7
6
5 4
3
2 1