Deutz-Fahr Agrovector 30.7 - Manual (Page 41)

Section 3 - Controls And Indicators
3-7 31200114
Park Brake
The Park Brake Lever (4) controls the application and release of the park brake.
• Pull back to activate.
• Push forward to deactivate.
Parking Procedure
1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow “Shut-Down Procedure” on page 4-3.
WARNING
MACHINE ROLL-AWAY HAZARD. Always move park brake lever to "ON"
position, lower boom to ground and stop engine before leaving cab.
WARNING
CRUSH HAZARD. Turning engine off applies the park brake. Applying park brake
or turning engine off while traveling will cause unit to stop abruptly and could
cause load loss. Either may be used in an emergency situation.
OAH0170
4