Despatch RAD1-42-2E with Protocol Plus - Manual (Page 34)

26
Menu Item Display Description
Ramp Time Seg 1 Pro-1 Seg-1 Ramp Time Ramp time for segment 1 of profile
Event 1 Set Value* Pro-1 Seg-1 Ramp Event 1 Event 1 setting for segment 1 ramp of profile
Event 2 Set Value* Pro-1 Seg-1 Ramp Event 2 Event 2 setting for segment 1 ramp of profile
Event 3 Set Value* Pro-1 Seg-1 Ramp Event 3 Event 3 setting for segment 1 ramp of profile
Event 4 Set Value* Pro-1 Seg-1 Ramp Event 4 Event 4 setting for segment 1 ramp of profile
Soak Temp Seg 1 Pro-1 Seg 1 Soak Temp Soak temperature for segment 1 of profile
Soak Time Seg 1 Pro-1 Seg 1 Soak Time Soak time for segment 1 of profile
Event 1 Set Value* Pro-1 Seg-1 Soak Event 1 Event 1 setting for segment 1 soak of profile
Event 2 Set Value* Pro-1 Seg-1 Soak Event 2 Event 2 setting for segment 1 soak of profile
Event 3 Set Value* Pro-1 Seg-1 Soak Event 3 Event 3 setting for segment 1 soak of profile
Event 4 Set Value* Pro-1 Seg-1 Soak Event 4 Event 4 setting for segment 1 soak of profile
(repeat for segments 2-8, until ramp or soak time = 00:00)
High Limit Setpoint Pro-1 Hi-Lim SP High limit setpoint for profile**
Loop From Pro-1 Loop From Seg To start a loop action in a profile
Loop To Pro-1 Loop To Seg To end a loop action in a profile
Loop Count Pro-1 Loop Number Number of times to execute loop
Profile Link Pro-1 Link To Pro To jump from this profile to another
Guaranteed Soak Pro-1 Guar Band Guaranteed soak band for profile
See the definitions on the following pages for parameter ranges.
* only available if optional relay outputs are installed (repeat all for profiles 2-8)
** Set to Band to use the high limit band feature