Despatch RAD1-42-2E with Protocol Plus - Manual (Page 12)

4
Power
Line voltages may vary in some geographical locations. If your line voltage is much
lower than the oven voltage rating, warm up time will be longer and motors may
overload or run hot. If your line voltage is higher than name plate rating, the motor may
run hot and draw excessive amps.
If the line voltage varies more than 10% from the oven voltage rating, some electrical
components such as relays, temperature controls, etc. may operate erratically.
Power Requirements
Model Volts Amps Hertz Phase Heater KW
RAD 1-42 240/208* 29.7/26.4 50/60 1 6/4.5 *
* Oven designed for 240 volts (see name plate on oven) will operate satisfactorily on a
minimum of 208 volts, but with a 25% reduction in heater power.