Tally dascom 1430, Interface setup, Advanced setup – Dascom 1430 User Guide User Manual
Page 37

Tally Dascom 1430
23
Exit Direction
Front, Rear
Selects eject direction for friction loaded papers.
Slip
Off, On
Selects the Slip profile mode.
Interface Setup
Interface
Setup
Valid Settings
Function
Interface
Auto, Parallel, USB
For multi-host connection. Auto: First come first served;
Parallel/USB: Serves the designated host only.
I-PRIME
Yes, No
Yes: Host I-Prime signal resets the printer.
Auto IF
Delay
10s, 30s
Determines the waiting time before receiving data from another
interface.
RAM Usage User Font, Buffer
User Font: Part of RAM is used for user download characters;
Buffer: Disables user character download function; uses RAM for
expanded buffer size up to 68KB.
Advanced Setup
Advanced Setup
Valid Settings
Function
Auto Load
Manual, 0.5s, 1s, 1.5s, 2s
Specifies the waiting time before loading a cut
sheet automatically. Manual: Auto load mode is
off. (Applies to friction mode only)
Paper Jam
Prevention
Yes, No
Flattens paper edges by carriage movement
before printing starts.
Paper End Detect
Yes, No
Yes: Detects paper out and halts printing;
otherwise, ignores paper out and continues
printing.
Form Length Ctrl
Software, Ignore
Ignore: Ignores form length commands
Pitch Ctrl
Software, Ignore
Ignore: Ignores CPI commands
Font Ctrl
Software, Ignore
Ignore: Ignores font select commands
Quality Ctrl
Software, Ignore
Ignore: Ignores print quality commands
Buzzer
Yes, No
Yes: Sounds buzzer on all hardware errors