Dascom 1430 User Guide - Manual (Page 20)

Tally Dascom 1430
6
Connecting the Mains Power
Checking the printer voltage
Make sure that the device has been set according to your country’s power supply voltage. To do this, check the
rating plate at the back of the printer. Contact your dealer if the setting is incorrect.
Never switch on the printer if the voltage setting is incorrect; this may result in electrical
damage to the printer.
Make sure that the power switch
“A”, located to the right side of the
printer, is in the OFF position.
Connect the power cord plug to a
mains socket. Switch on the
printer.